(3)
Press
to activate your selection. The alarm is now set to alert every day at this
specified time.
2.11 Private Time
You can select a time period during which your pager is completely silent. Your pager
still receives messages but is does not alert. The pager alerts only if an alarm expires
or a priority message is received.
2.11.1 Set Private Time
(1)
From the Function menu, press
▲
to move the cursor to .
(2) Press .
When the Private-time screen is first displayed, the cursor is at the flashing symbol on
the far left, indicates private time is enabled,
indicates private time is disabled.
Example of Set Private-Time Screen
(3) Press and release until is displayed.
(3)
Press
▼
to move the cursor to the hour digit.
(4)
Press to adjust the hour digit.
(5)
Repeat steps 4 and 5 to adjust the on and off time setting.
(6)
Press
to activate you selection.
The symbol is displayed in the Standby screen when private time is enabled.
Note:
If the on time is equal to the off time, private time is not enabled.
2.11.2 Disable Private Time
(1)
Press .
(2)
Press
▲
to move the cursor to .
(3)
Press .
(4)
Press and release until
is displayed.
(5)
Press
to disable private time.
2.12 Stopwatch function
From the Function menu, press
▼
to move the cursor to , Press to activate
stopwatch function.
start counting, again
to stop counting.
▲
or
▼
to reset , to quit.
3. Notebook
Your pager has a personal notebook for storing personal messages, From standby
menu move shade to Notebook directory, press
to enter. .
Example of Notebook
