background image

1

Check the VESA Pattern of TV before the Installation

100 mm ≈ 4 in.

200 mm ≈ 7 7/8 in.

600 mm ≈ 23 5/8 in.

400 mm ≈ 15 3/4 in.

Minimum VESA pattern: 100mm/4 in.(W)x100mm/4 in.(H)

If your TV VESA is greater than 600x400 mm/24x16in. or less than 

VESA 100x100mm/4x4 in., this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at 

[email protected] to find a compatible mount.

MAX: 600mm/23.6 in.

MAX: 400mm/16 in.

IMPORTANT SAFETY INFORMATION

Please carefully read all instructions before attempting installation. If you do 

not understand the instructions or have any concerns or questions, please 

contact our customer service at [email protected].

CAUTION: 

Avoid potential personal injuries and property damage! 

• Do not use this product for any purpos

e that is not explicitly specified in this 

manual. Do not exceed weight capacity. We are not liable for damage or injury 

caused by improper mounting, incorrect assembly or inappropriate use.
• This product is designed for use in wood stud, solid concrete, and concrete 

block walls - 

DO NOT install into drywall alone.

• The wall must be capable of supporting five times the weight of the TV and 

mount combined.

Weight Restrictions

DO NOT exceed the maximum weight indicated. 

This mounting system is intended for use only 

with the maximum weights indicated. Use with 

products heavier than the maximum weights 

indicated may result in failure of the mount and 

its accessories, causing damage and or injury.

If your TV weighs more, this 

mount is NOT compatible.

132lbs/

60kg

WARNING

Summary of Contents for APPSLTK2













Reviews: