2
|
WEIGHT STACK ASSEMBLY
STEP 2A: INSTALL WEIGHT
STACK RODS
Remove top rod holding block and
cover plate.
Install rods and bump stops into
bottom rod holding block as shown.
STEP 2B: INSTALL WEIGHT
PLATES
Carefully tilt out weight stack rods.
Install 29 weight plates, one at a time,
taking care that orientation is as shown
(weight label to the right).
DO NOT drop weight plates.
DO NOT lean on or bump the weight
stack rods.
Install the top plate assembly, inserting
the middle rod through the centre holes
of the weight plate stack.
