English
EISBAER LT AURORA
Alphacool International GmbH
44
WATER INLET
INITIAL START UP
If your Eisbaer LT AiO is unusually loud during initial operation, tipping the entire PC case
back and forth a little can help. The higher volume level of the pump occurs due to air
bubbles in the closed system. These bubbles form during transport or due to movement
during installation.
Double-check that the radiator is mounted above the water block. This setup helps de-
aerate the system. After around 12 hours of operation any air in the system should be
eliminated and the pump should run quietly as usual.
USING QUICK RELEASE CONNECTORS
The pre-installed quick-release fastener offers the possibility of expanding the Eisbaer loop
quickly and easily. The connector is compatible with many other products from our range.
Attention: 2 -3 drops of water can escape when unscrewing the quick
release
mechanism
–
This is normal.
WATER OUTLET
