Stuck Sleeve?
If your sleeve is stuck, put it in the freezer for a few
minutes and it will come right out.
Let It Cool Down -
The EDIOVEN should cool between each cycle,
approximately 15 minutes. The inner cup should be cool to the
touch before starting any new cycle.
To end a cycle,
hold the Start / Pause button 5 seconds until it turns
green or just unplug it.
Get Ready/ Assemble –
Place the silicon sleeve into the metal cup.
Then place metal cup into the EDIOVEN. Keep the silicone lid and
plastic top cover near by.
NOTE: Be sure the cup is COMPLETLY DRY
before placing in EDIOVEN.
Power -
Plug into power outlet. The green light indicates it’s ready
for you to select your settings.
INSTRUCTIONS
01.
02.
07.
Summary of Contents for EDIOVEN
Page 1: ...INSTRUCTION MANUAL EDIOVEN...
