ADJUSTING THE TRIM CONTINUED
LIVE FEED VIDEO SCREEN / RECORDING VIDEO
PROBLEM:
The throttle control is too
sensitive.
CORRECTION:
Click the THROTTLE TRIM down
until the throttle C is to your liking.
PROBLEM:
The throttle control isn’t
sensitive enough.
CORRECTION:
Click the THROTTLE TRIM up
until the throttle sensitivity is to
your liking.
POWER
ENTER
UP/RECORD
DOWN
MENU
MENU BUTTON:
Press the button to
bring up the menu. Press it again to
close it.
ENTER BUTTON:
Select what is
highlighted in the menu.
UP/RECORD BUTTON:
When the menu is open this button will move the selection upward in
the menu. When the menu is closed the button will act as the record video button.
DOWN BUTTON:
When the menu is open this button will move the selection downward in the
menu.
POWER BUTTON:
Press and hold
down the power button for 3 seconds
to turn on the video screen. Repeat
the process to turn off the screen.
RECORDING VIDEO:
Make sure the transmitter, live feed video screen and drone are all turn
on. Install the included mini memory card to the right side of the live feed video screen. Press
the UP/RECORD button to start recording video. A “record” text box will flash on the top left of
the screen when you are recording video. Press the UP/RECORD button again to stop
recording video. If you see NO SIGNAL flash on the screen the drone my be turned off. Make
sure the drone’s battery pack is charged and plugged in.
LIVE FEED VIDEO SCREEN:
When the drone, transmitter and live feed video screen are all
turned on you will see a live feed of what the camera on the drone is seeing on the video
screen. If the transmitter is on but the screen won’t power on make sure the video screen
power cord is plugged into the screen and transmitter.