10
hoW to ADD the RuSt INhIbItoR oIl
1. Disconnect the angle grinder from
your air supply.
2. Remove the screw using a screw
driver. (See Fig. 3)
3. Add 4-5 drops of the Rust
Inhibitor Oil into the oil port. (See
Fig. 4)
4. Reinstall the Oil screw.
5. Reconnect the pneumatic
angle grinder to your air supply.
6. Depress the throttle lever
varying the speed from very low
to half speed, for thirty seconds.
(See Fig. 5)
Replacement Rust Inhibitor Oil
can be purchased from Alpha
®
Professional Tools (Part No. AIR-008).
Figure 3
Figure 4
Figure 5
