4
Cleaning the Magnetic Cyclone (yearly service)
Cyclone Body
Magnet Retaining Clip
1. Close the isolation valves connected to the cyclone and the boiler return.
2. Place a bucket underneath the Cyclone and remove the retaining clip by pulling it forwards with a pair of pliers.
3. Pull the magnet downwards to withdraw it from the Cyclone body; a small amount of water will flow out of the Cyclone.
4. Using a cloth wipe any magnetite from the magnet.
5. Reassemble in reverse order
Alpha Therm Limited.
Nepicar House, London Road, Wrotham Heath,
Sevenoaks, Kent TN15 7RS
Tel: 0344 871 8764
email: info@ alpha-innovation.co.uk
website:
part no. 1.041339 rev. ST.003465/000
Magnet
