Getting Started
Install the DicksonWare™ Software.
Connect the cable (supplied with the software) to the logger and to a working UBS port on your computer.
Click the Setup button. When the setup window appears, all fields should be automatically filled in, this will confirm that
DicksonWare™ has recognized the logger. Should all fields remain blank, refer to “No Communication” in the Trouble
Shooting section of this manual. Once DicksonWare™ recognizes the logger, press the Clear button. This will delete all
data currently stored.
The logger is now sampling and ready for use. The default sample interval is 1 minute. Verify that the indicator light is
flashing every 10 seconds. You may choose to change Default settings for sample interval and start-date and time. When
changing these settings, the logger will automatically go through the clear process to accept your changes. The LED will
flash red when the unit is set-up for delayed start
NOTE:
To conserve battery life when storing unit, press the Setup button and select the shortest Sample Interval and Stop
When Full in the Samples section or remove the battery.
DicksonWare™ Software Specifications
Microsoft Windows® compatible. Allows for simple viewing and zooming of logged data. Easy set-up of Dickson Data Loggers
including:
User selectable sample intervals from 10 s to 24 hrs
Display temperature in °C or °F
Delayed logger start times
Logger data capacity can be set to wrap data or stop when full
Allow for real time monitoring and graphing.
Effortless exporting of data and graphs to other software
Data can be viewed in tabular (numeric/table) or graphical formats
Fast downloading of logged data - 30 s (typical) from full logger
Even shows battery power status for battery operated loggers
Specifications
Compatible With: Microsoft Windows® 95, 98, 2000, NT & XP Display temperature in °C or °F
PC Requirements: PC with 486 MHz or faster microprocessor, 16 MB RAM, 1 free USB root hub, CD drive, VGA monitor
or better
Cable Type/Length:
USB male series “A” plug to 5-pin male series “B” mini plug, 6 ft (2 m)
Computer Interface: USB
DicksonWare™ Version Required (minimum): 10.0
Troubleshooting
For troubleshooting information, visit our tech support page:
www.dicksondata.com/support
Warranty
Dickson warrants that the products it sells will be free from defects in material and workmanship under normal use and service
for a period of twelve months after delivery. In the event of a claim under this warranty, the product or part must be returned to
the factory for repair or replacement (shipping pre-paid) with a Return Authorization Number (see Return Information above). It
will be repaired at Dickson’s option without charge. This warranty DOES NOT cover routine calibration, pen, chart and battery
replacement. The foregoing warranty and remedy are exclusive and in lieu of all other warranties either expressed or implied.
Dickson shall not be liable for consequential or incidental damages resulting from failure or malfunction of its products. Dickson
makes no warranty for products not manufactured by it or for any products modified by buyer, or subject to misuse or neglect.
