8
PREPARATION BEFORE OPERATION
1. GFCI Information.
– Since the Alpha
®
Wet Polisher is designed with double insulation, an in-line GFCI is
provided as a standard accessory. For your safety and to prevent possible electric
shocks, it is strongly advised to test the GFCI on a regular basis.
Note: The GFCI must be used for your safety when this polisher is
used anywhere in a damp environment, when used with water, or
when it is used on metal plates, steel frames or platens.
Never attach a damaged extension cord to the polisher.
Note: Use the appropriate extension cord as referred below. The
table shown below is for 115V use. For 220V use, the maximum
length of a cord may be twice as long as the cord for 115V.
LAWS AND REGULATIONS OF NOISE LEVELS
Please observe local laws and regulations regarding noise level in order to avoid disturbing
surrounding areas. Install a soundproof wall if required to comply with the local laws and
regulations.
Gauge/AWG
Maximum Length
1.25mm
2
30 Ft / 10m
2mm
2
45 Ft / 15m
3.5mm
2
90 Ft / 30m
DANGER!
Summary of Contents for AWP-158
Page 18: ...18 ALPHA AWP 158 SCHEMATIC...
