The CONTROL MENU
(Table B) lets you control,
program and adjust the
Alpha FXM for connection
to
traffic
intersection
equipment
or
other
applications. You can
control the:
INVERTER Enable/
Disable
INVERTER On/Off
LVD DSCNNCT
LVD CONNECT
BYPASS
BATT TEST
BT TS DOD
AUTO TEST
SHUTDOWN
SHUTDOWN AC
SHUTDOWN DC
SENSE TYPE
FUNC MODE
VOLTAGE
AUTO FREQ
FREQUENCY
QUAL TIME
INVERTER CUTOFF
Enable/Disable
INVERTER CUTOFF
(voltage)
CHARGER
BATT FLOAT
CHGR CUR
BATT COMP
DATE FRMT
CLOCK FRMT
INV RECORD
RELAY TEMP
TEMP DISP
DAYLIGHT
CONFIGURE IP
The SYSTEM STATUS
menu (Table C) lets you
measure various inputs,
outputs and other values.
The
available
measurements are:
VIN
VOUT
IOUT AC
BATT TEMP
FREQ IN
OUTPUT PWR
BATT VOLT
CHGR CUR
DATE
TIME
INV COUNT
INV TIMER
BUCK/BOOST
SHED TIMER 1, 2
OR 3
MAC Address
IP Address
kWh
Remain Tm
Serial Number
VERSION
The ALARM and FAULT
menus in the Trouble-
shooting section are
invisible and disabled
until the Alpha FXM has a
malfunction.
When the front panel
alarm LED is on or
flashing, press SELECT.
One of the malfunctions
listed in Table R and
Table S will appear
on the LCD. Press the
SCROLL button to see if
more
than
one
malfunction is present.
Fix the malfunction.
Press
the
SELECT
button to clear the
malfunction from the
screen.
If the malfunction is fixed,
the malfunction is cleared
from the LCD. If it isn’t
fixed, it will reappear on
the screen.
The EVENT STATUS
menu displays the last 200 Alpha
FXM events on the LCD.
Press the SELECT button to
access the menu. Press SELECT
and then the SCROLL button to
scroll through the events. To see
what a specific event was, press
the SELECT but- ton. Press the
SCROLL button to see what
malfunction triggered the event.
Figure 11 — LCD Menu Tree
Page
22
to
95
