Alpha Moisture Systems SADPmini Logger, Instruction Manual, Page: 13 / 14

readings, pressure, when the readings were taken and the start and finish time of the test. A
maximum of 12800 readings can be displayed on the graph.
It is therefore strongly
recommended that the logging time interval is chosen so that during the data logging
process the number of readings stored does not exceed 12800.
Graph Manipulation
Palette:
The graph manipulation palette enables the graphical display to be manipulated in
various ways.
The top three Icons enable specific areas of the graphical
display to be enlarged. The area to be enlarged is selected by
depressing the left mouse button and dragging the cursor.
The graphical display is then redrawn. The Bottom left Icon
performs an undo function. The other 2 Icons are zoom in
and out functions activated by pressing the left mouse button.
Digital Display indicators:
The following information is read from the selected file and displayed in four digital
display indicators, located above the graphical display
TAG Name:
Sample Rate (mins):
Date:
Start Time:
Print button:
This button will automatically send a printout to the computers default printer. There
is no printer setup function so the printout will conform to the printers default
settings. i.e. the printout will be in portrait if that is the default setting of the printer.
Select File button:
This button brings up the File Selector panel.
Block Indicator LEDs:
These controls are disabled and grayed out when reviewing a real time file
There are 20 LEDs, one for each permissible block of data that can be
stored under each TAG name on the SADPmini. When a file is opened, the
LEDs indicate as follows:
Light Green – Block containing data.
Blue – Block containing data and currently selected
for graphing.
Dark Green – Block containing no data.
Page 9 of 10