Alpha Micro components NetPort, Quick Start Manual, Page: 7 / 14

Assign IP Manually
If the NetPort is NOT shown in DeviceInstaller:
1. Click the Assign IP icon .
2. When prompted, enter the hardware address in the format 00-20-
4a-XX-XX-XX, where the XXs are unique numbers assigned to each
individual product. Click
Next.
4. Select Assign a specific IP address and click Next .
5. Enter the IP address. The Subnet mask displays automatically based on the IP
address; if desired, you may change it. On a local network, you can leave the Default
Gateway blank (all zeros). Click
Next .
6. Click the Assign button and wait several seconds until a confirmation message
displays. Click Finish.