background image

7

Product name.

A4-PLUS-J

Technical Specifications

LED Chip Type

0.5W Full RGBW LED

Estimated LED Lifetime (hours) 

50,000

White Light (K) 

2,500~10,000 (VCT)

Full Color Light 

Full RGB+W (4Color Gamut with Hue and Saturation Control)

Color Rendition (%) 

CRI 97 / TLCI 97

Dimming (%) 

0~100 (16-bit)

Light Aperture Size (mm/inch) 

297 x 297 / 11.7 x 11.7

Beam Angle ( °) (Standard)

115

Signal Control 

5-Pin DMX In and Out

Individual Control 

Smart Touch LCD Controller

Supported Protocol 

DMX512 / RDM

(Optional) Supported Protocol 

DMX512 Wireless / RDM Wireless

Remote Device Management 

Supported

Channel Function 

Dimming / CCT / Tint / RGBW / Cross Fader / Color Macro

Power Input Voltage 

AC 100-240V / 50~60Hz

Power Consumption (W) 

230

Ambient Temperature 
Operation ( °C) 

-20~45

Spigot Mounting (mm) 

16 / 28

Tilt Angle ( °)  

+ / - 90

Body Dimensions 
(mm/inch) (WHD)

413 x 390 x 192 / 16.3 x 15.4 x 7.6

Full Dimensions with Manual 
Yoke (mm/inch) (WHD)

491 x 500 x 192 / 19.3 x 19.7 x 7.6

Body Weight (kg/lbs) 

6.6 / 14.6

Full Weight with Manual Yoke 
(kg/lbs)

6.7 / 14.8

Protection Class 

IP20

* This specification data is based on the aging state of the equipment, 

and the brightness and color temperature before and after aging may be different.

Summary of Contents for A-PLUS-J Series
































Reviews: