4
Subject to change without notice | 83024000bUK – Translation of the original operating manual | ait-deutschland GmbH
1.4 Contact
Addresses for purchasing accessories, for servicing or
for answers to questions about the unit and this oper-
ating manual can be found on the internet and are kept
up-to-date:
●
Germany: www.alpha-innotec.de
●
EU: www.alpha-innotec.com
2 Safety
Only use the unit if it is in perfect technical condition
and only use it as intended, safely and aware of the
hazards and under full observance of this operating
manual.
2.1 Intended use
The unit is intended exclusively for the following func-
tions:
●
Heating
● Domestic hot water preparation (optional, with ac
-
cessories)
●
Cooling, reversible
►
Intended use includes complying with the operating
conditions (
“Technical data / scope of supply”,
page 17) and the operating manual and ob-
serving the reference documents.
►
If local regulations apply, observe: laws, stand-
ards and directives.
All other use of the unit is interpreted as not intended.
2.2
Personnel qualifications
All instructions and information in this operating manu-
al are intended excusively for qualified and skilled per
-
sonnel.
Only qualified and skilled personnel are able to carry
out the work on the unit safety and correctly. Interfer-
ence by unqualified personnel can result in fatal inju
-
ries and material damage.
►
Ensure that the personnel are familiar with the lo-
cal regulations, especially those relating to work-
ing safely and in awareness of the hazard risks.
►
Have work on the electrical and electronic compo-
nents carried out only by qualified personnel with
“electrical” training.
►
Have any other work on the system carried out
only by qualified and skilled personnel, e.g.
●
Heating installers
●
Plumbers
● Refrigeration plant manufacturers (maintenance
work)
During the warranty and guarantee period, servicing
and repair work may only be carried out by personnel
authorised by the manufacturer.
2.3 Personal protective equipment
There is a risk of cutting your hands on sharp edges
of the unit.
►
Wear cut-resistant protective gloves during trans-
port.
2.4 Residual risks
Injuries caused by electric current
Components in the unit are live with fatal voltage. Be-
fore opening the unit casing:
►
Disconnect the unit from power supply.
►
Protect the unit against being switched back on
again.
►
Residual voltage at the inverter. Wait for 90 sec-
onds before opening the unit.
Risk of injury from moving parts
►
Only switch on the unit with air ducts and weather
protection grid fitted.
Injuries and environmental damage due to
refrigerant
The unit contains harmful and environmentally dan-
gerous refrigerant. If refrigerant leaks out of the unit:
1.
Switch off the unit.
2. Notify authorised after sales service.
