21
USER Operation of the VFS1000 / VFS1500 Open Voice COLOR Monitor
& FS1000/FS1500 Audio only stations
General Operation
After a visitor has rung the bell at the entrance, the monitor will turn on automatically. You
can push the ON/OFF
button and talk with the visitor. You are also able to activate the
door opener. Pushing the ON/OFF button will end the communication and the monitor will
turn off automatically. You can switch on the monitor at any time by pressing the ON/OFF
button. To switch off the monitor hold the ON/OFF button for approx. 3 seconds.
Manually switching Multiple Cameras ( if equipped)
Turn on the monitor by pressing the ON/OFF
button. Pushing this button again will cycle
through all available cameras on the system.
Changing the Ring sound of your inside station
You can select one of eight different doorbell signals for each indoor station by the following
method:
5.
Keep the LIGHT
button depressed and push the FUNCTION
button. This will
play the first ringtone (
make sure the station hasn’t been called shortly before,
otherwise press the ON/OFF button twice to stop communication).
6. To hear the next ringtone, continue keeping the LIGHT
button depressed and
push the FUNCTION
button again. The last ringtone heard will be stored
automatically.
7. The ringtone sent by the optional door bell button (connected at E & T) cannot be
changed.
8. In systems with more than one entrance there is a differentiation between the ringtone
automatically.
Adjusting the Volume of the Ringtone
1. Keep the Function
button depressed and volume will decrease slowly to mute
and then increase to full volume.
2.
Release the button at the desired volume level. (
make sure the station hasn’t
been called shortly before, otherwise press the ON/OFF button twice to stop
communication).
Adjusting the Brightness of the Monitor
1. Turn on the monitor by pressing the ON/OFF
button.
2.
Keep the Function
button depressed and brightness will decrease slowly
and then increase to full brightness. Release the button at the desired
brightness level. Turn off monitor.
Replacing an Indoor Station
The new station must be programmed into the system (See programming Instructions Page 13)
