4.Operating Instructions
4.1General Operations:
Turn on the headset
Press and hold MFB (Multi-function
Button) for 4 seconds, when LED start
blinking. You can hear a voice prompt
“
p
ower is on”
Turn off the headset
When headset is on, press and hold
MFB for 4 seconds, when LED flashes
twice in red. Y
ou can hear a voice
prompt “p
o
wer is off”at
the same time.
Entering pairing mode
If your Q9 headset has not been paired
to any mobile phones, it enters pairing
mode when the power is on. If the
headset has been paired to some
phone before and you need to pair it
with a new phone, press and hold MFB
for 6 seconds until the LED flashes in
red and blue alternatively. You will hear
a voice prompt “
ready to pair”, and the
following prompts will guide you to sync
the headset with your phone.
Language Selection
At the first time of use, you have the
option to select a language for voice
prompts after the device is powered on.
To reset language, press and hold
“MFB” and “Vol+”at same time until
power off. When the headset is powered
on next time, language selection is
available again.
