Alpego DELTA Series Use And Maintenance Manual Download Page 11 | Manualshive

Page: 11 / 16

Alpego DELTA Series Use And Maintenance Manual Download Page 11

MANUALE DELTA

Old Cod.D02694

New Cod. MANT2010/00605 R.4

INSTALLATION

- 7

Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

5.1. COUPLING WITH A ROTATING HARROW OR TILLER

There is a three point hitch at the back of the machine for connecting a rotating harrow or a tiller.
Connect the lower arms of the rotating harrow or the tiller to the 2 lower connections A, then
choose one of the three available holes so that you obtain the correct working depth (see section
6).
Insert the third point into the hole B, then connect one of the cardan joints indicated in section
5.5 below to the rotating harrow or the tiller.

SELECTING THE CARDAN JOINT

M70A00177

CARDAN WITH BOLT LIMITING
DEVICE FOR: RD 540 REVS.

M70A00179

CARDAN WITH BOLT LIMITING
DEVICE FOR: RE 540 REVS. – RH
1000 REVS.

M04633W

CARDAN

WITH

AUTOMATIC

LIMITING DEVICE FOR : RE 540
REVS. - RH 1000

M70A00177

CARDAN WITH FRICTION FOR:
FP/LP 540 REVS. - FH/LH 1000
REVS.

«
...
9
10
11
12
13
...
»

Summary of Contents for DELTA Series

















Reviews:

No comments