ASSEMBLY
1. Place the mist maker in the cylinder (Fig. 1).
2. Pull power cord through the hole at the bottom of the vessel. Squeeze the rubber stopper through the
hole ensuring a water-tight seal. After this operation, do not pull the cord which could cause leakage
(Fig. 2).
3. Take care that electronic unit has been placed at the centre of the vase.
4. Insert the splash guard on the cap and make sure the splash guard faces the higher side of the glass
(Fig. 3).
5. Connect hand-held control to the cord and to the transformer (Fig. 4).
6. Fill the vessel without exceeding the level max and add your favorite aromatherapy oil (optional).
12
3
4
1
2
notice_AF03-04L:notice DH_25EC 28/05/08 10:44 Page 12
