AR7088H Router User Manual
Tel:+86 592-6195619 Fax:+86 592-6195620
E-mail:
Page 22 of 59
Web:
Add: NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Refer to M1-PPP mode.
Force reconnect:
Reset the connection according to the set time.
Connect Fail:
Switch to Backup WAN after link failure times.
Dial Fail to Restart:
Time of restart system for this link fail.
Keep Alive:
This function is used to detect whether the Internet connection is active. It will
redial to users' ISP immediately to make the connection active if users set it and when the
router detect the connection is inactive. Specifies how many seconds to wait before
reconnect the link after it terminates.
None:
Do not set this function
Ping:
Send ping packet to detect the connection, when choose this method. Users should
also configure "Keep Alive Interval", "Keep Alive Server IP" and "Keep Alive Server IP2"
items.
Route:
Detect connection with route method, when choose this method. Users should
also configure "Keep Alive Interval", "Keep Alive Server IP" and "Keep Alive Server IP2"
items.
PPP:
Detect connection with PPP method, when choose this method. Users should also
configure "Detection Interval" item.
Keep Alive Fail:
Switch to Backup WAN after keep alive fail times.
Note:
When users choose the “Route” or “Ping” method, it’s quite important to make sure
that the "Keep Alive Server IP" and "Keep Alive Server IP2" are usable and stable,
because they have to response the detection packet frequently.
