AD7028 Cellular Router User Manual
Tel:+86 592-6195619 Fax:+86 592-6195620 E-mail:
Page 26 of 41
Web:
Add: NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
3.5.3 IPSEC
Name:
Indicate this connection name, must be unique.
Enabled:
If enable, the connection will send tunnel connection request when it is reboot
or re-connection, otherwise it is no need if disable.
Local WAN Interface:
Local addresss of the tunnel.
Remote Host Address:
IP/domain name of end opposite; this option can not fill in if
using tunnel mode server
Local Subnet:
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this
option can not fill in if using transfer mode.
Remote Subnet:
IPSec opposite end protects subnet and subnet mask,
i.e.192.168.7.0/24; this option can not fill in if using transfer mode.
Local ID:
Tunnel local end identification, IP and domain name are available.
Remote ID:
Tunnel opposite end identification, IP and domain name are available.
Use a Pre-Shared Key:
Choose use share encryption option.
Enable Advanced Settings:
Enable to configure 1
st
and 2
nd
phase information,
otherwise it will auto negotiation according to opposite end.
Phase 1(IKE)
Encryption:
IKE phased encryption mode.
Integrity:
IKE phased integrity solution.
DHGrouptype:
DH exchange algorithm.
Lifetime:
Set IKE lifetime, current unit is hour, the default is 0.
Phase 2(ESP)
Encryption:
ESP encryption type.
Integrity:
ESP integrity solution.
Keylife:
Set ESP keylife, current unit is hour, the default is 0.
