-7-
-8-
※
※
Maintenance and Repair
WARNING!
Be sure to turn off the power before for maintenance to avoid accidents !
Because of the air filter is easy to accumulate dust , blocking the air intake passage ,
thereby affecting the dehumidification
effect , therefore, must be regularly
cleaned.
If the machine is in larger dust places,
should be cleaned once a ~ 5 days .
If the machine is used in relatively
clean environment can be cleaned once a
month.
1. Clean the filter
Filter
DEHUMIDIFIERS
DEHUMIDIFIERS
B.
This machine uses a value consistent with the nameplate power outlet must be
grounded port.
C.
Remove the power cord and reliably , securely plugged into a power outlet.
D.
Make sure the machine 's inlet and outlet is not blocked or blocking other objects.
Ensure the inlet and outlet of the machine can effectively play the smooth performance of the
machine and reduce electricity costs .
E.
Before starting the outlet pipe into a drainage tank or water container.
※
Use Instructions
※
1 . " On / Off " Button :
a.Press this
" "
Button,
b.Press this
" "
button again,the unit will stop running .
※
Preferably stand for 10 minutes , so that the remaining water droplets on the
evaporator flows into the water tanks .
Please unplug the power cord after the machine is turned off to save standby power
consumption and avoid the risk of accidents .
2 ."Up" and "Down" Button
Used to adjust the set humidity , also used to adjust the timing shutdown and timing for
the start of the set time.
• Humidity setting adjustment range :
Between 35 to 90 percent , up or down button
once for each 1% , when the set humidity < 35% , digital display "C0" enter the continuous
dehumidification mode , the first power-on defaults "50 %." ( Note : Continuous
dehumidification mode not affected by humidity )
The unit automatically determines whether the current humidity
reaches the starting condition. Such as to reach the starting, such as the current humidity
is lower than the setting humidity, then do not start, running lights shining.
