Alopek V-TRACK Installer Manual Download Page 2

 

Alopek, Inc 

650 S Military Trail, Deerfield Beach, FL 33442 

[email protected]  954-234-2397 

©2007, Alopek, Inc. All rights reserved. 

 

 
General 

 

All efforts have been made to ensure the accuracy of material provided in this document at the 
time of release. However, the items described in this document are subject to continuous 
development and improvement. All specifications are subject to change without notice and do not 
represent a commitment on the part of Alopek, Inc. will not be responsible for any loss or 
damages incurred related to the use of information contained in this document.  
This product is not intended for use in life support appliances, devices or systems where a 
malfunction of the product can reasonably be expected to result in personal injury. Alopek, Inc. 
customers using, integrating, and/or selling this product for use in such applications do so at their 
own risk and agree to fully indemnify Alopek, Inc. for any damages resulting from illegal use or 
resale.  

 
 
Copyright 

 

Complying with all applicable copyright laws is the responsibility of the user. Without limiting the 
rights under copyright, no part of this document may be reproduced, stored in or introduced into a 
retrieval system, or transmitted in any form or by any means (electronic, mechanical, 
photocopying, recording or otherwise), or for any purpose, without the express written permission 
of Alopek, Inc.  
Alopek, Inc may have patents, patent applications, trademarks, copyrights or other intellectual 
property rights covering subject matter in this document. Except as expressly provided in any 
written license agreement from Alopek, Inc, the furnishing of this document does not give you any 
license to these patents, trademarks, copyrights or other intellectual property.  

 
 

Regulatory Compliance  

 

FCC 

 

The modem was tested and certified to meet FCC Parts 15 in a stand-alone configuration, which 
demonstrated that the V-Track complies with Part 15 emission limits. FCC Part 22 & Part 24 is 
covered by the modem "modular approval" process for a transmitter. This approach, described by 
FCC Public Notice DA 00-131407 released June 26, 2000, is intended to afford relief to 
equipment manufacturers by eliminating the requirement for obtaining a new equipment 
authorization for the same transmitter when installed in a new device.  
In order to use the V-Track without additional FCC certification approvals, the installation must 
meet the following conditions:  
For the transmitter to meet the MPE categorical exclusion requirements of 2.1091, the ERP must 
be less than 1.5 watts for personnel separation distance of at least 20 cm (7.9 in). Therefore, the 
maximum antenna gain cannot 3.3dBi. If greater than 1.5 watts exists, then additional 
testing and FCC approval is required.  
 
 

R&TTE -

 

 

The V-Track modem has been fully tested and complies with all the requirements of EN301 489-
1, EN301 489-7 and EN60950-1:2001.  

 
Disclaimer 

 

The information and instructions contained within this publication comply with all FCC, GCF, 
PTCRB, R&TTE, IMEI and other applicable codes that are in effect at the time of publication. 
Alopek, Inc disclaims all responsibility for any act or omissions, or for breach of law, code or 
regulation, including local or state codes, performed by a third party.  
Alopek, Inc strongly recommends that all installations, hookups, transmissions, etc., be performed 
by persons who are experienced in the fields of radio frequency technologies. Alopek, Inc 
acknowledges that the installation, setup and transmission guidelines contained within this 

Summary of Contents for V-TRACK















Reviews: