9
EN
MOUNTING HEATER PROTECTION GRILLE
Refer to the heater installation instructions for further heater installation details.
Drill hole in rear of sauna to bring
power to sauna heater. Location
shown is typical, but the wire can
come in at any point most convenient
and accessible to the power source.
Bring conduit into sauna in
compliance with local electrical
codes.
Interior view of wire coming into sauna
and then wiring directly to heater
according to heater manufacturer’s
installation and hookup instructions.
Attach the final piece - the
remaining pre-assembled
portion.
Position the fence around the heater and use the pre-drilled holes to attach it to
the wall.
Prop up the first pre-assembled portion and attach the two long horizontal pieces.
Make sure the countersunk holes on the wall mounting bracket face inward.
Your fence kit will arrive
banded with stretch wrap. It
consists of four pieces, shown
here.
