almando Multiplay Surround Decoder Installation And Operating Instructions Manual Download Page 11 | Manualshive

Page: 11 / 28

almando Multiplay Surround Decoder Installation And Operating Instructions Manual Download Page 11

11

Step 3: Connect the Sources

HDMI ARC / CEC

Connect the Television with the supplied HDMI cable and activate the HDMI ARC
function in the setup menu of your TV set. Please observe the instructions in the
operating instructions of the TV.

POWERLINK (8pin DIN)

Here you can connect a Bang & Olufsen audio system (e.g. BeoSound 9000,
BeoSound Overture, etc.) with a classic Powerlink cable.

Even newer B&O systems (such as BeoSound Essence, BeoSound Moment, etc.) can
be connected - but for this you need an adapter cable Powerlink <-> RJ45.

SPDIF

If possible, use only devices with a volume-controllable optical output, such as Apple
Airport Express, Denon Heos, Google Chromecast Audio, Sonos Connect, etc. The
necessary fiber optic cables are already included in the package of the almando
Multiplay Surround Decoder.

RCA

Any devices that have a stereo RCA output (if possible adjustable by volume), e.g.
Raumfeld Connector, Sonos Connect.

«
...
9
10
11
12
13
...
»

Summary of Contents for Multiplay Surround Decoder





























Reviews:

No comments