almando Multiplay Stereo, Manual, Page: 10 / 20

10
Step 3: Establishing a Bluetooth connection to the smartphone / tablet
After connecting the almando Multiplay Stereo / Powerlink-Switch to the mains open
the settings in your smartphone, enable Bluetooth, and search for new Bluetooth
devices in the area. As soon as a device named "Almando..." is found, click on it and it
is paired with the device. You have two minutes to do this after pressing the Bluetooth
button on the – during this time, the device is in discovery mode and is visible to your
smartphone when scanning for new devices.
This pairing only needs to be done once. If you want to connect another smartphone
later, simply disconnect the almando device from the mains for a few seconds and do
the same as when pairing with the first smartphone.
Step 4: Connecting the speakers
The almando Multilpay Stereo and the almando Powerlink switch offer an 8-pin DIN
socket for connecting Bang & Olufsen loudspeakers. On request, the Powerlink
output is also available as RJ45 socket for the new generation B&O speakers
(e.g. BeoLab 18).
Connecting speakers individually with a Y-adapter
To connect your B&O speakers individually,
you need a Powerlink-Y-Adapter (#210111),
because the almando Multiplay and the
almando Powerlink-Switch have only one
output socket.
This example shows the connection of a pair
of BeoLab 8000.