Allview Hybrid S, User Manual

Page: 20 / 164

20
27. Night mode_______________________________________________
With a single press of the lower button of the Hybrid S / T smartwatch,
the device’s screen
will light up for approximately 10 seconds, allowing you to see the time in the dark.
In the Allwatch H app you can choose between several interfaces for the Night mode.
To select another interface for the Night mode, open the Settings menu
– Advanced settings
– Night mode and choose the desired interface.
28. Firmware update________________________________________
If firmware updates are available, you will have to install them. The updates can be done wireless, through
the mobile app. Before starting the upgrade, make sure that both your smartphone and your watch are over
30% charged, preferably the watch is connected to the charger.
To upgrade the Hybrid S / T smartwatch: - Connect to the
Allwatch H app
- If an upgrade is available, a message will appear on the
main screen of the app, asking if you wish to upgrade.
- You must confirm to start the upgrade, and the image on the left will appear on screen.
If the upgrade is successful, you will be notified on the watch screen and on the
app.