3 EN
If any damages are found, please contact the service person to replace the power cord set specified by the
manufacturer or have the same characteristics as the original one.
Pay attention to the environmental aspects of battery disposal.
No naked flame sources, such as lit candles, should be placed on the device. To prevent the spreading of fire,
keep candles or other open flames away from the device at all times.
Warning:
We take no responsibility for situations where the device is used other than as provided in the
manual. Our company reserves the right to make changes in the content of the manual without making this
public. These changes will be posted on the company website to the product it amends. The contents of this
manual may be different from that in the product. In this case, the first one will be taken into consideration.
If the device has the symbol
in its rating label and the power cord has two pins, it means that the equipment
is a Class Il or double insulated electrical appliance. It has been designed in such a way that it does not require
a safety connection to electrical grounding. (Only for Class Il appliance)
Warning for devices containing COIN/BUTTON CELL BATTERIES (The instructions below are only used for
the apparatus containing a user-replaceable coin/button cell battery)
Do not ingest the battery, Chemical Burn Hazard
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery
is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used
batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children. If
you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical
attention.
This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert
the user of the presence of a non-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer to
qualified service personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
The following information is recommended to be included as far as applicable, where applicable:
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to Class II equipment.
Refers to stand-by.
Refers to power ON.
Refers to dangerous voltage.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer from where the
product was purchased. It can take this product for environmental safe recycling.
PREPARATION
Disassembly and Installation
1. Open the package.
2. Take out the TV.
3. Install the TV stands.
4. Connect the power cord.
Positioning the TV
Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Place the panel
side of TV on the platform and insert the two stands into TV, making the screws holes of stands correspond to
the right holes of TV.
Fix screws on the bottom of back cover, two for each side, assembly finished.
