8
14. Select cable operator:
DIGI: where scanning is done by predetermined rules and the channels are arranged by the
provider’s grid and cannot be rearranged.
OTHERS: where a complete scanning is done and the channels can be arranged by the user’s
preference.
Select if you wish or not to start the channel scanning. Connect a signal cable before starting the
scan.
Note: If you do not want the channel scanning in this step, you can do it later, in the TV settings,
from the global settings.
15. Set up is done. Have a pleasant use – Finish – press OK key from the remote.
16. Read the License Agreement for the end user – press right arrow from the remote to
Accept.
Basic operation
E-Manual
The E-manual is built into your TV and can be displayed on the screen.
To learn more about your TV features, access your E-Manual by referring to the following:
1.
Press the HOME button to access the home page.
2.
Press
and OK button to select “E-Manual” in “Apps”.
Note: The picture is only for reference.
1.
Remote Control: To check the detailed functions of the remote control, please select
and enter
2.
How to use E-Manual: Please select and enter
, which can tell you how to check
the E-Manual, the meanings of specific icons or contents shown in the E-Manual and
so on.
Install Remote Control Battery
Place two AAA size batteries in the remote control’s battery compartment, making sure to match the
polarity markings inside the compartment.
Note: The picture is only for reference.
