ALLUXITY Integrated One, User Manual

Page: 7 / 22

Page 7
Using the touch display
All the Alluxity products uses a 5 inch, 800 x 480 pixels resistive touch display. The display is a robust in-
dustry screen that is highly resistant to cracks and therefor is not as sensitive as your average smartphone
touchscreen. This means that you will have to press gently on the display with the tip of your finger and/or
with you fingernail for it to react.
However, pressing too hard in the display can cause damage to it.
If you experience that there is no reaction from the touch display, do not increase the pressure,
but contact the nearest Alluxity cooperating partner.
How to connect an Alluxity product
When connecting an amplifier it’s very important not to switch around input and output.
Doing so will cause harm to the product.
To connect your Pre One properly, make sure that you take the left and right output from your
source and connect it to the same left and right input on the Pre One.
Right
Red
Left White
The inputs must be either left and right RCA 1 or 2, XLR 1, 2 or 3.
Now connect either the RCA or the XLR outputs from the preamplifier to the equal input on the powerampli-
fier
(RCA
RCA, XLR XLR).