Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 25 of 34
4.5.3. Deleting limit values
You delete limit values by setting new values as described above. If all
values are set to zero the limit value function is deactivated.
Resetting the instrument to factory defaults sets back all limit values
to zero.
5.0 Interfaces
(series FMI-B30 und FMI-S30 and higher)
Force gauges series FMI-B30 and FMI-S30 and higher can transfer
measured data and incidents like overload or the exceeding of limit
values via USB (2.0) or Hirose-cable to a PC or a motor driven test
stand.
5.1. Data transfer via USB
For data tranfer via USB you need a USB cable (part no.: FMI-931USB)
and a software with the device driver.
5.1.1. Software FMI_Connect
The software FMI_Connect (part no.: FMI-972) enables to transfer data
from Alluris force gauges to MS Excel and generate graphs. You may
control the instrument via PC as well as set parameters.
Install the software FMI_Connect before connecting the instrument
first time to your PC or notebook, in order to ensure the instrument
is detected automatically. Use FMI_S-Connect for series FMI-S and
FMI_B-Connect for series FMI-B from the installation CD.
Software FMI_Connect
Screenshot interface
