Allterco Robotics Shelly Bulb, User Manual

Page: 4 / 20

Installation
Instructions
CAUTION! Danger of electrocution. Bef ore installing the Dev ice
into the light socket please check if it has been powered of f .
CAUTION! Bef ore beginning the installation please read the
accompany ing documentation caref ully and completely . Failure to
f ollow recommended
procedures could lead to malf unction, danger to y our lif e or v iolation of
the law.
Allterco Robotics is not responsible f or any loss or damage in case of
incorrect
installation or operation of this
dev ice.
CAUTION! Use the Dev ice only with power grid which comply with
all applicable regulations. Short circuit in the power grid
connected to the
Dev ic
e may damage the
Dev ice.
RECOMMENDATION: The Dev ice may be connected to and may
control electric circuits and light sockets only if they comply with
the respectiv e
4
standa
r
ds and saf ety
norms.
Initial Inclusion
Install the Shelly to the light socket. Press the switch/button to which
Shelly is connected. The Shelly should turn on. Press the switch/button
again and Shelly will turn of f .
Y ou may choose if y ou want to use Shelly with the Shelly Cloud mobile
applicatio n a nd Sh elly Cloud serv ice. Y ou can also f amiliarize y ourself
with the instructions f or Manag ement a nd Control thr oug h the embe dde d
Web interf ace.
Factory Reset
Y ou can return y our Shelly Bulb to its Factory Settings by pressing 5
consecutiv e times the button/switch f or control.
Upon successf ul f actory reset Shelly will turn Blue.
Control your home with your voice
All Shelly dev ices are compatible with Amazon Echo and
Google Home. Please see our step-by -step guide on:
https://shelly.cloud/compatibility/Ale
xa
https://shelly.cloud/compatibility/Ass
istant