KEENAN MechFiber 250 and
280 Operator’s Manual
33
Revision C01, 04
th
Dec 2019
Electronic weigh box:
If the machine is to be stored, remove the weigh box unit from the
machine and keep in a dry place. Lightly grease the load cell cable
connector end and place it into a plastic bag.
Wheels:
Remove and inspect wheel hub. Replace worn parts, redress and
re-fit.
Blades:
Blades need to be kept sharpened. This will have to be done
without taking the temper (overheating) from the blades. If the
machine is operated with blunt blades, it will cause major stress on
the drive system. Blades may have to be replaced when it is not
practical to sharpen them.
10 Specifications
10.1 Weight
Table 7: Machine weights
* Note:
1: Weights may vary depending on exact specifications.
WARNING:
Due to hazards involved in entering the mixing chamber, it is recommended that all
blade replacement is carried out by a KEENAN authorized service agent who is
specially trained to do this. Contact your local agent (see back cover for details).
Model Weight
MechFiber250
MechFiber280
Unladen
kgs
4,550
5,520
lbs
10,022
12,159
Payload
kgs
2,500
2,750
lbs
5,507
6,057
Gross
kgs
7,050
8,270
lbs
15,529
18,216
