Step 1
- Determine locations for the slide mount on the underside of the worksurfaces. Reference images below for
suggested locations.
Step 2
- Install Slide Mount to the underside of the worksurface with given hardware and insert Minitap. Use provided
clips to hold Nodes to bottom of worksurface.
Step 3
- Use Cable Management Straps (
C
) to secure excess cord to frame.
11
11
11
11
Node
Cable Management
Strap
Installation Packet
Page 4 of 9
3430408700
Park
Illustration 2a: Kit of Parts - Layered Conference, NALCF
Tall Leg
A- Frame
Stretcher Bar
Top Crossbeam
Short Leg
*I
mportant
- Right hand and Left hand for some parts
Top Crossbeam
LH
RH
Illustration 2b: Noteables
Illustration 1e: Electrical Attachment - Optional
LH
RH
Short Leg
Cable Management
Bracket
*S
crew
a
ppearance
-
When installed correctly, screws are countersunk. Reference image below.
Node Clip
Slide Mount