All
SportSystems, Inc.
©
2021
BUILDING THE FRAME
Frame Diagram
Refer to this diagram often to identify connectors and poles needed for the step by step instructions on
the following pages.
Note:
Corner brackets add approximately 3” to the size of your enclosure. Therefore, once poles
and brackets are assembled an additional 3” will be added to the finished width, height and depth of
your enclosure. Therefore, all poles are cut 3” shorter than the finished height, width, or depth of
the enclosure.
If you have ordered a
custom
sized enclosure make note of this factor when cutting
your poles
.
Page 8 of 35
Last Revised 6/7/22
