All
SportSystems®
Powering the FlightPanel
If your FlightPanel includes internal screens or other accessories such as
an internal USB Hub, GPS Navigator, etc, these will typically require power
and other connections (HDMI or USB).
● Remove the Rear Access Panels being careful not to disturb the
internal wiring.
● Connect POWER and USB cables as needed
● Be careful not to overtighten screws.
● Some devices will need to be attached from behind while others will
attach through the front.
● We recommend connecting all add-in devices to a powered USB Hub
(included with CLASSIC and PRO FlightPanels). As always, be
careful not to disturb the internal wiring or the microcontroller.
● CLASSIC & PRO ONLY: Plug the 15’ USB cable cable into the USB
port installed on the back. Plug the other end into a USB port on your
computer.
● FLEX ONLY: Plug the 15’ USB cable into the microcontroller using
the connector nearest to the white reset button. Plug the other end
into a USB port on your computer or into a powered USB hub.
Page 4 of 30
