980216
–
HCV270 Manual
Page 13 of 22
Rev 9 Issue 2. Date: 25/08/2021
IMPORTANT -
Ensure that the anvil is fully closed before
performing a cutting operation.
IMPORTANT -
Maintain pressure on the auxiliary anvil instroke to
keep the anvil closed throughout the cut cycle.
DO NOT OPERATE THE MAIN RAM IF THE ANVIL IS NOT FULLY
CLOSED AND PRESSURISED
8.4
Extend the Blade (Cut Cycle)
To extend the blade, pressurise the
‘
Blade Dow
n’ port on the HCV
270 main cylinder whilst ensuring
that the
‘Blade Up’
port is open to tank. Do not exceed the maximum operating pressure. Continue
to apply pressure until the cut is complete.
IMPORTANT
–
Do not attempt to open the anvil without first retracting the main
ram.
8.5
Retract the Blade (Return Cycle)
To retract the blade, pressurise the
‘Blade Up’ port on the
HCV270 main cylinder whilst ensuring that
the ‘Blade Down’ port is open to tank.
Do not exceed the maximum operating pressure.
