980216
–
HCV270 Manual
Page 6 of 22
Rev 9 Issue 2. Date: 25/08/2021
4
Declaration of Conformity
DECLARATION OF CONFORMITY
Company name:
Allspeeds Ltd
Company address:
Royal Works, Atlas Street, Clayton le Moors, Accrington, Lancashire
BB55LW, UK
Machinery covered by this
declaration:
Description:
Hydraulic Cutting Tool
Model:
980216
Type:
HCV270
Revision:
Rev 9
The machinery conforms to the following essential requirements
of the Machinery Directive 2006/42/EC:
The machinery also conforms to
the following Directives:
N/A
The following standards have
been applied:
N/A
This machinery must not be put into service until the machinery into which it is to be incorporated
has been declared in conformity with the provisions of the machinery directive
The technical documentation is compiled in accordance with part A of
Annex VII of the Machinery Directive 2006/42/EC
Person authorised to compile the
relevant technical documentation
(based in the European
Community):
Name:
Authorised Rep Compliance LTD.
Address:
71 Baggot Steet Lower, Dublin,
D02 P593, Ireland
The relevant authorised person undertakes to transmit, in response to a reasoned request by the national
authorities, relevant information on the machinery. This information will be transmitted by: (email, post)
Person authorised to make this
declaration:
Name:
Keith Elliot
Position in
company:
Managing Director
Signature :
Place of
Declaration:
Accrington, Lancashire, UK
Date of
Declaration:
4
th
January 2021
