Step 4
Attach the inner rods to the base, in the centre of the “C” Parts (see
Figure 4
).
Note:
There will be 2 holes on either side of both of these inner rods. The holes on one side are
for standard screws, whereas the holes on the other side will have a larger area around the screw
holes for large-headed screws. The standard screw holes should face the “E” Parts and the large-
headed screw holes should face the “D” Parts. For this reason, the inner rods need to be attached
opposite ways round so that the security poles (Parts “D” and “E”) can be attached correctly.
Figure 4
Summary of Contents for LHDS
Page 1: ...LHDS Setup Revision date 19 08 20...
Page 2: ......