ELECTRIC
This unit comes complete with a generous supply of 3 core cable, however
should any additional cable be required, the use of an approved waterproof
cable connector with a proper rating is essential. A cord rated for less amperes
or watts than the appliance rating may overheat.
Please Ensure:
·
The power supply must be earthed and fused at 3amps.
·
You regularly inspect the cable for damage and deterioration.
·
Do not connect to any voltage other than that stated.
·
You consult a qualified electrician if in doubt about any aspects of
wiring.
·
A residential current device (RCD) is used for additional safety
·
You have complied with Local Electricity Authority regulations if
permanently installing to the mains supply.
Please Ensure:
The power supply must be earthed and fused at 3amps.
Regularly inspect the cable for damage and deterioration. Consult a qualified
electrician if in doubt about any aspects of wiring.
CHOOSING YOUR FILTER LOCATION
·
The pressure of your unit depends on many factors such as location (height
and distance from pond), power and location of connected pump (L/H),
stock density and hose dimensions. To enhance pond water quality, we
recommend considering these factors to ensure maximum efficience and
avoid low return pressure.
·
Ensure the PF is located at least 2 metres from the pond edge.
·
The PF is suitable for burying up to the head rim of the unit. Please ensure
you can still access the body for maintenance purposes. Burying the unit
will help reduce the distance between the filter and the pond and provide
higher return water pressure.
Summary of Contents for PF-12000
Page 17: ......
