background image

MAINTENANCE

To ensure optimal performance and that your unit functions correctly, regular maintenance is 

essential. Failure to do so may result in damage to your unit and may invalidate your warranty. 

We recommend that a regular cleaning and maintenance schedule is followed to ensure 

responsible fishkeeping. Regular maintenance will help ensure that the product works 

efficiently and the aquarium remains healthy.

For further maintenance guidance, please see the table and additional information below:

2. 

Place the air pump on a surface higher than the water level, 

such as a shelf. The surface should be at least 12 inches (30 

cm) higher than the water level of the aquarium, but not be 

positioned directly above the aquarium. The surface should 

have a raised edge to prevent the air pump from sliding off 

(Diagram 2).

Diagram 2

Drip

Loop

The All Pond Solutions air pumps incorporate a flow control 

knob to control air output. 

Turning the knob clockwise increases the air flow and 

counter-clockwise reduces the air flow.

Air Flow Adjustment

1 MONTH

3 MONTHS

ANNUALLY

Air Stone

Inspect & Clean

Replace

Diaphragm

Replace

Air Hose

Inspect & Clean

Replace

Non Return 

Valve

Replace

Summary of Contents for AP-1.5-KIT













Reviews: