background image

8

8) ARRANGEMENT OF THE HEATING ELEMENTS

LEFT ANTERIOR

LEFT REAR

RIGHT REAR

RIGHT ANTERIOR

When idle, the hob will be completely switched off.

After  switching  on  the  hob  by  pressing  the   

button,  use  the   

button  to  activate  the  heating

element required (the indicator flashes) then use the  

and  

buttons to adjust the cooking level

and confirm it using the  

button (pressed initially).

The cooking levels range from 1 (minimum to 9 (maximum). The cooking level must be regulated within 3

seconds of activating the cooking area, otherwise it will be automatically deactivated.

9) TIMER

There is a cooking time with a time range of 1 to 99 minutes (symbol 

).

After activating the cooking area required, as shown above, press the 

button (pressed initially). The

indicator  will  flash.  Then  press  the 

button  and  the  corresponding  indicators  will  come  on.  Use  the

and  

buttons to enter the minutes and confirm using the  button (pressed initially). 

The cooking area programmed will be highlighted by a led near the timer indicators. 

It is also possible to use timed cooking on several heating elements at the same time: after setting the

timer  on  the  first  heating  element,  press  the  button 

to  shift  the  timer  controls  to  the  next  active

heating element (the led between the 

and 

symbols of the second active cooking area) and then

set the cooking time as indicated earlier. 

Confirm it by pressing the 

button (pressed initially) again.

CHANGE THE REMAINING TIME OF AN ACTIVE ELEMENT

Enter the programmed cooking area by pressing the 

button and regulate the remaining time using

the 

and  

buttons, confirming everything.

MODEL: PT1358

DESCRIPTION OF THE HOT PLATES

Summary of Contents for PT1356





















Reviews: