i
Regulatory notes and statements
Wireless LAN, Health and Authorisation for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of
these emissions however are far less than the electromagnetic energy emissions from wireless
devices like mobile phones. Wireless LAN devices are safe for use as defined by the relevant
frequency safety standards and recommendations. Note: The use of Wireless LAN devices may be
restricted in some situations or environments for example:
- On board Airplanes
- In an explosive environment
- Where interference risk to other devices or services is perceived or identified as harmful
- In organizations which enforce a policy regarding the use of Wireless LAN devices (e.g. airports,
hospitals, chemical/oil/gas industrial plants, private buildings etc.).
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or modifications made to
this device that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The Manufacturer is not responsible for any radio or television interference
caused by unauthorized modification of this device, or the substitution or attachment of additional
antennas. The Manufacturer and its authorized resellers/distributors will assume no liability for any
damage or violation of government regulations arising from failing to comply with these guidelines.
USA-FCC (Federal Communications Commission) statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of this device.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evalua ted under FCC Bulletin OET 65 and found compliant
to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing
RF Exposure from radio frequency devices. The radiated output power of this Wireless LAN device is
far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a
manner that the potential for human contact during normal operation is minimized.
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance
between the antennas and the user should not be less than 20 cm.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and correct the interference by one
or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
