MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
3.3 Port
3.3.1 Status
Displays the status of each port on the converter including, Link Up/Down status, whether the port
is enabled or disabled, Speed and Duplex settings as well as Flow Control settings. More detailed
fibre information is also shown including the type of fibre (Single Mode/Multimode), the wavelength
and the distance of the fibre.
Fig. 3.6
Port:
Is the physical port number of the switch.
Media:
The type of media the port uses, TP (Copper) or Fibre.
Link:
Displays whether the link is active for each port.
Mode:
Displays whether the port is enabled or disabled.
Auto Nego.:
Displays whether auto-negotiation is enabled or disabled.
Speed/Duplex:
Displays the speed and duplex settings of each port.
Flow Control:
Displays whether flow control is enabled or disabled.
Connector:
Displays the connecter type of the fibre port.
Mode:
Displays whether the fibre is multimode or single-mode.
Cable:
Displays whether the fibre cable is Two wire or Single fibre.
Wavelength:
Displays the wavelength of the fibre.
Distance:
Displays the Distance of the fibre.
