GSS Series User Manual
3.2.15 SNMP
Fig. 3.26
SNMP Enabled:
Used to enable or disable SNMP.
SNMP Trap
Destination:
Enter the IP address of a device used to receive SNMP Traps.
SNMP Get
Community:
Enter the SNMP Get community name in the space provided.
SNMP Set
Community:
Enter the SNMP Set community name in the space provided.
SNMP Trap
Community:
Enter the SNMP Trap community name in the space provided.
Cold Boot:
Tick this check box for an SNMP trap to be sent when the event occurs.
Warm Boot:
Tick this check box for an SNMP trap to be sent when the event occurs.
Link Up:
Tick this check box for an SNMP trap to be sent when the event occurs.
Link Down:
Tick this check box for an SNMP trap to be sent when the event occurs.
Refresh Button:
Used to refresh the current settings displayed on the screen.
Apply Button:
The Apply button must be pressed after making any changes to any of
the values on this screen.
Alloy Computer Products Pty Ltd Copyright ©2007
42
