AMS Quick Install Guide
23
Network Wiring Connections
Today, the punch-down block is an integral part of many of the newer equipment racks. It is actually
part of the patch panel. Instructions for making connections in the wiring closet with this type of
equipment follows.
1.
Attach one end of a patch cable to an available port on the switch, and the other end to the
patch panel.
2.
If not already in place, attach one end of a cable segment to the back of the patch panel
where the punch-down block is located, and the other end to a modular wall outlet.
3.
Label the cables to simplify future troubleshooting. See “Cable Labeling and Connection
Records”.
Switch
Equipment Rack
(side view)
Patch Panel
Patch-Down Block
Wall
