AMS Quick Install Guide
13
Power sockets on AMS-4T24S4SFP
3. Network Planning
Installing the Switch
Selecting a site
The AMS Series switches can be rack mounted in a standard 19” equipment rack using the supplied
Rack Mount Kit, or they can be installed on any flat surface. Be sure to follow the guidelines below
when choosing a location.
The site should be:
At the centre of all the devices you want to link and near a power outlet.
Be able to maintain its temperature within 0 to 40°C (32 to 104 °F) and its humidity within
10% to 90%, non-condensing.
Be accessible for installing, cabling and maintaining the device.
Allow the status LEDs to be clearly visible.
Make sure the twisted-pair Ethernet cable is always routed away from power lines, radios,
transmitters or any other electrical interference.
Make sure that AMS Series switches are connected to a separate grounded power outlet
that provides 100 to 240 VAC, 50 to 60 Hz.
IEC Power Socket
48VDC Power Socket
