1
BLOX ESBC
Quick
Installation
Guide
Page 1: ...1 BLOX ESBC Quick Installation Guide ...
Page 2: ...tial setup 1 Make the setup as described in Hardware setup section and then plug one end of the RJ45 Ethernet cable to your PC Laptop other end into the MGMT port of the Blox eSBC 2 Change the Network setting of the PC Laptop and set in manual mode i e Static IP mode Assign the IP address to the PC Laptop in the range of 192 168 1 xx E g 192 168 1 10 net mask as 255 255 255 0 3 Launch the web brow...
Page 3: ...k on Network Settings Configure the LAN and WAN interfaces to static IP depending upon your network scenario 6 Now connect the Straight through RJ45 Ethernet cable from WAN port of Blox eSBC to your external Network Switch and LAN port to your internal Network Switch Reconfigure your PC Laptop network settings as before ...
