8
INSTRUCTIONS
Enabling button (See Fig.4) Using the jumpers JP5-8, you can select which receiver output channel
and, therefore, which remote control button, will enable the output signal. This selection is made by
closing just one of the jumpers present, following the scheme indicated below:
JP5 – Channel 1 - Button 1 / JP6 – Channel 2 - Button 2 JP7 – Channel 3 - Button 3 / JP8 – Channel 4
- Button 4
Enabling button row (See Figures 5 and 6):
The receivers may be used with 2-, 4- or 14-button remote controls. If you use it with a 14-button
remote control, you can use the jumpers JP3 and JP4 to define which row of buttons the receiver must
respond to, following the scheme indicated below:
JP3 – JP4 open: row 1 (Buttons 1-4) JP3 closed: row 2 (Buttons 5-8) JP4 closed: row 3 (Buttons 9-12)
JP3 – JP4 closed: row 4 (Buttons 13-14)
APRIMATIC UNICO RR-SE Receiver
Visit our website: www.Alloremotecontrol.com
