Allnet ALL60200 User Manual Download

Page: 44 / 91

Edit RAID

On the

RAID Information

screen, press the

Edit

button to go to the

RAID

Information

screen.

Using

Edit

RAID

you can select RAID ID and the Spare Disk. .

Remove RAID

Click to remove the RAID volume. All user data has been created in selected RAID
volume will be removed.

To remove a RAID volume, follow the steps below:

On the RAID List screen, select the RAID volume by clicking on its radio
button, and click

RAID Information

to open the

RAID Configuration

screen.

On the

RAID Configuration

screen, click

Remove RAID

The confirmation screen appear, you will have to input “Yes” with exactly
wording case to complete “

Remove RAID

” operation

WARNING

Remove RAID destroys all data in the current RAID volume. The data is

unrecoverable.

Summary of Contents for ALL60200




























































































Search results

Summary of Contents for ALL60200

Reviews:

Related manuals for ALL60200

Brands by name

Popular brands

Allnet ALL60200, User Manual

Search results

Summary of Contents for ALL60200

Reviews:

Related manuals for ALL60200

Brands by name

Popular brands